Model # | Description | Price |
6 Meter Products (50 - 54 MHz) | ||
---|---|---|
L50-28 | 6M transverter assembled, < 1.0dBNF, High level mixer, 28Mhz IF, 25W output | 479.00 |
L50-28CK | Complete kit version of 50-28 | 359.00 |
L50-28K | PC Board kit only, 50mW Output and same RX Specs as 50-28. | 220.00 |
X22.000 | Standard 22.000Mhz crystal for 28MHz IF (included with transverter) | 16.00 |
X24.000 | Optional 24.000Mhz crystal for 26MHz IF = 50MHz (Special Order Crystal) | 25.00 |
L50LNA | GaAs pHEMT pre amp., 17dBG, <0.5DBNF, RX only! BNC connectors. Assembled. | 75.00 |
L50LNA-2N | GaAs pHEMT pre amp., 17dBG, <0.5DBNF, RX only! Type "N" connectors. Assembled. | 75.00 |
L50LNACK | Complete kit version of L50LNA with BNC connectors and machined die cast enclosure. | 45.00 |
L50LNACK-1N | Complete kit version of L50LNA with one type "N" connector for Input connection and machined die cast enclosure. | 45.00 |
L50LNACK-2N | Complete kit version of L50LNA with type "N" connectors and machined die cast enclosure. | 45.00 |
L50LNAK | PC Board kit version of L50LNA without enclosure, Feed-thru capacitor or connectors | 25.00 |
L50LNAPCB | PC Board and documentation of L50LNAK | 12.00 |
Follow link for other related Accessories. |
4 Meter Products (70 - 72 MHz) | ||
---|---|---|
L70-28 | 4M transverter assembled., 25W, <1.0DBNF, High level mixer, 28Mhz IF | 479.00 |
L70-28CK | Complete kit of 70-28 with all connectors, machined enclosure and heatsink 25Woutput | 359.00 |
L70-28K | PC Board kit only, 50mW Output and same RX specs as 70-28 | 220.00 |
4MLDPA | 4M 25W Power Amplifier/LNA module designed for the Flex 6700/6500 transceiver | 350.00 |
WSSVHFA | Synthesized VHF/UHF WSS assembled in enclosure, requires external 10MHz source | 160.00 |
WSSVHFAI | Synthesized VHF/UHF WSS assembled in enclosure, with internal 10MHz source | 190.00 |
VHFAPOLLO | Assembled VHF/UHF Syntheziser PC Board only use in WSSVHF and transverters. Requires external 10MHz source | 129.00 |
2 Meter Products (144 - 148 MHz) | ||
---|---|---|
L144-28HP | 60W Version of 144MHz Transverter, Custom Built to your Specifications | Base Price 589.00 |
COMMRF-OPT | Common RF option for all HP version transverters, factory installed only. | 75.00 |
L144-28 | 2M transverter assembled., 25W, <1.0DBNF, High level mixer, 28Mhz IF Pictures | 479.00 |
L144-28CK | Complete kit of 144-28 with all connectors, machined enclosure and heatsink | 359.00 |
VHFAPO-OPT | Synthesized LO Opt. for assem. transverter (substitutes xtal LO) requires external 10MHz source | 90.00 |
DUALVHFLO | Both Xtal and Synthesized LO installed in assembled transverter w/ switch. Requires external 10MHz source | 150.00 |
144-28INT | To convert 2M IF Microwave Transverters to 28MHz IFAssembled. | 249.00 |
144-28INTCK | To convert 2M IF Microwave Transverters to 28MHz IFComplete kit with enclosure and hardware. | 195.00 |
144-28INTK | To convert 2M IF Microwave Transverters to 28MHz IFPC Board kit. | 149.00 |
TIK2 | Universal Transverter Interface for Elecraft K2 transceiver, kit only!. | 30.00 |
EKTI | Transverter Interface for Elecraft K2 transceiver. | 15.00 |
X116.000 | Standard 116 MHz crystal for 28MHz IF = 144MHz RF (included with transverter) | 16.00 |
2MLDPA-25 | 2M 25W Power Amplifier/LNA module designed for the Flex 6700 transceiver | 350.00 |
2MLDPA-75 | 2M 75W Power Amplifier/LNA module designed for the Flex 6700 transceiver | 380.00 |
COMMRF-OPT | Common RF option for 2MLDPA-75, factory installed only. | 75.00 |
2M30PA | 30W, 2M, Linear Amplifier. Assembled NO T/R switch! | 210.00 |
2M30PACK | 30W, 2M, Linear Amp Complete kit with Heat sink and enclosure. NO T/R switch! | 160.00 |
L144LNA | GaAs pHEMT pre amp., 17dBG, <0.5DBNF, RX only! BNC connector, assembled. | 75.00 |
L144LNA-1N | GaAs pHEMT pre amp., 17dBG, <0.5DBNF, RX only! Type "N" connector on Input, assembled. | 75.00 |
L144LNA-2N | GaAs pHEMT pre amp., 17dBG, <0.5DBNF, RX only! 2 Type "N" connectors, assembled. | 75.00 |
L144LNACK | Complete kit version of L144LNA with BNC connectors and machined enclosure. | 45.00 |
L144LNACK-1N | Complete kit version of L144LNA with one type "N" connectors and machined enclosure. | 45.00 |
L144LNACK-2N | Complete kit version of L144LNA with type "N" connectors and machined enclosure. | 45.00 |
L144LNAK | PC Board kit of L144LNA, without enclosure, connectors or Feed-Thru capacitor | 25.00 |
L144LNAPCB | PC Board and documentation of L144LNA | 12.00 |
WSSVHFA | Synthesized VHF/UHF WSS assembled in enclosure, requires external 10MHz source | 160.00 |
WSSVHFAI | Synthesized VHF/UHF WSS assembled in enclosure, with internal 10MHz source | 190.00 |
VHFAPOLLO | Assembled VHF/UHF Syntheziser PC Board only use in WSSVHF and transverters. Requires external 10MHz source | 129.00 |
Follow link for other related Accessories. |
1.25M Products (219 -225 MHz) | ||
---|---|---|
222-28HP | 222MHz transverter, 60W output, <1.0dBNF Custom Built to your specifications | Base Price 639.00 |
COMMRF-OPT | Common RF option for all HP version transverters, factory installed only. | 75.00 |
222-28 | 222 MHz. transverter assembled, 25W, <1.0DBNF, High level mixer, 28Mhz IF Pictures | 479.00 |
222-28CK | Complete kit of 222-28 with all connectors, machined enclosure, and heatsink | 359.00 |
VHFAPO-OPT | Synthesized LO Opt. for assem. transverter (substitutes xtal LO) requires external 10MHz source | 90.00 |
DUALVHFLO | Both Xtal and Synthesized LO installed in assembled transverter w/ switch. Requires external 10MHz source | 150.00 |
X194.000 | Standard 194 MHz crystal for 28MHz IF (included with transverter) | 18.00 |
222PA | 30W, 1.25M, Linear Amplifier assembled. NO T/R switch! | 215.00 |
222PACK | 30W, 1.25M, Linear Amp Complete kit with Heat sink and enclosure. NO T/R switch! | 165.00 |
222LNA | GaAs pHEMT pre amp., 17dBG, <0.5DBNF, RX only! BNC connectors. Assembled. | 75.00 |
222LNA-1N | GaAs pHEMT pre amp., 17dBG, <0.5DBNF, RX only! Type "N" connector on Input. | 75.00 |
222LNA-2N | GaAs pHEMT pre amp., 17dBG, <0.5DBNF, RX only! 2 Type "N" connectors. | 75.00 |
L222LNACK | Complete kit version of L222LNA with BNC connectors and machined enclosure. | 45.00 |
L222LNACK-1N | Complete kit version of L222LNA with one type "N" connectors and machined enclosure. | 45.00 |
L222LNACK-2N | Complete kit version of L222LNA with type "N" connectors and machined enclosure. | 45.00 |
L222LNAK | PC Board kit of 222LNA, without enclosure, connectors or Feed-Thru capacitor | 25.00 |
L222LNAPCB | PC Board and documentation of 222LNA | 12.00 |
WSSVHFA | Synthesized VHF/UHF WSS assembled in enclosure, requires external 10MHz source | 160.00 |
WSSVHFAI | Synthesized VHF/UHF WSS assembled in enclosure, with internal 10MHz source | 190.00 |
VHFAPOLLO | Assembled VHF/UHF Syntheziser PC Board only use in WSSVHF and transverters. Requires external 10MHz source | 129.00 |
Follow link for other related Accessories. |
70cm Products (7430 - 450 MHz) | ||
---|---|---|
L432-28HP | 432MHz transverter assembled, 50W out., <0.7dBNF, 28MHz IF. | Base Price 599.00 |
COMMRF-OPT | Common RF option for all HP version transverters, factory installed only. | 75.00 |
L432-28 | 432MHz transverter assembled, 28MHz IF. | 499.00 |
L432-28CK | 432MHz transverter complete kit, with enclosure & hardware. | 379.00 |
VHFAPO-OPT | Synthesized LO Opt. for assem. transverter (substitutes xtal LO) requires external 10MHz source | 90.00 |
DUALVHFLO | Both Xtal and Synthesized LO installed in assembled transverter w/ switch. Requires external 10MHz source | 150.00 |
X101.000 | Standard 101.000 MHz crystal for 432MHz operation = 28MHz (included with transverter) | 16.00 |
X101.750 | Optional 101.750 MHz crystal for 435MHz operation = 28MHz (No charge substitution at time of order) | 16.00 |
7025PA | 420-450MHz 25W Linear Amplifier, 10mW input. Assembled NO T/R switch! | 210.00 |
7025PACK | 420-450MHz 25W Linear Amp Complete kit with Heat sink and enclosure. NO T/R switch! | 160.00 |
L432LNA | 432MHz GaAs pHEMT pre-amp, <0.5DBNF, 17dBG, RX only! BNC connectors assembled. | 75.00 |
L432LNA-1N | 432MHz GaAs pHEMT pre-amp, <0.5DBNF, 17dBG, RX only! Type "N" connector on Input only. | 75.00 |
L432LNA-2N | 432MHz GaAs pHEMT pre-amp, <0.5DBNF, 17dBG, RX only! 2 Type "N" connectors | 75.00 |
L432LNACK | Complete kit version of L432LNA with BNC connectors and machined enclosure. | 45.00 |
L432LNACK-1N | Complete kit version of L432LNA with one type "N" connectors and machined enclosure. | 45.00 |
L432LNACK-2N | Complete kit version of L432LNA with type "N" connectors and machined enclosure. | 45.00 |
L432LNAK | PC Board kit of L432LNA, no enclosure or connectors | 25.00 |
L432LNAPCB | PC Board and documentation of 70LNA | 12.00 |
WSSVHFA | Synthesized VHF/UHF WSS assembled in enclosure, requires external 10MHz source | 160.00 |
WSSVHFAI | Synthesized VHF/UHF WSS assembled in enclosure, with internal 10MHz source | 190.00 |
VHFAPOLLO | Assembled VHF/UHF Syntheziser PC Board only use in WSSVHF and transverters. Requires external 10MHz source | 129.00 |
Follow link for other related Accessories. |
33cm Products (902 -928 MHz) | ||
---|---|---|
903-144HP3 | 903 MHz transverter assembled, 30W out, <1.5dBNF, 144MHz IF | Base Price 590.00 |
903-144HP6 | 903 MHz transverter assembled, 60W out, <1.5dBNF, 144MHz IF | Base Price 800.00 |
902-144HP3 | 902 MHz transverter assembled, 30W out, <1.5dBNF, 144MHz IF | Base Price 590.00 |
902-144HP6 | 902 MHz transverter assembled, 60W out, <1.5dBNF, 144MHz IF | Base Price 800.00 |
COMMRF-OPT | Common RF option for all HP version transverters, factory installed only. | 75.00 |
903-144 | 903MHz transverter, 0.5W, High Dynamic Range, <1.5DBNF, 144 MHz. Assembled> | 395.00 |
903-144CK | 903MHz Xverter, 0.5W, High Dynamic Range, <1.5DBNF, 144 MHz Complete kit w/ connectors, and machined enclosure> | 295.00 |
903-144K | 903MHz Xverter, 0.5W, High Dynamic Range, <1.5DBNF, 144 MHz PC Board kit without hardware or enclosure> | 220.00 |
902-28HP3 | 902 MHz transverter assembled, 30W out, <1.5dBNF, 28MHz IF | Base Price 590.00 |
902-28HP6 | 902 MHz transverter assembled, 60W out, <1.5dBNF, 28MHz IF | Base Price 800.00 |
902-28 | 902MHz transverter, 0.5W, High Dynamic Range, <1.5DBNF, 28 MHz. Assembled> | 395.00 |
902-28CK | 902MHz transverter, 0.5W, High Dynamic Range, <1.5DBNF, 28 MHz. Complete kit with connectors and machined enclosure> | 295.00 |
902-28K | 902MHz transverter, 0.5W, High Dynamic Range, <1.5DBNF, 28 MHz. PC Board kit without hardware or enclosure> | 220.00 |
903-144HK | Hardware kit, with connectors and machined enclosure | 100.00 |
903-144PCB | PC Board and documentation of 900 MHz transverter 144MHz IF | 50.00 |
X189.750 | 189.750 MHz crystal for 903 operation with 144 MHz IF (Included with transverters) | 18.00 |
X189.500 | 189.500 MHz crystal for 902 operation with 144 MHz IF (can be substituted) | 18.00 |
3340PA | 902-928MHz 40W Linear Amplifier. 20mW input, Assembled. NO T/R switch! | 235.00 |
3340PACK | 902-928MHz 40W Linear Amplifier Complete kit with machined enclosure and heatsink NO T/R switch! | 185.00 |
3370PA | 902-928 MHz 70W Linear Amplifier assembled only! NO T/R switch! | 400.00 |
3370PAS | With Transceiver switching option | 520.00 |
33160PA | 160W 900MHz linear amplifier, assembled only | Base Price 845.00 |
TRANS-OPT | Transceiver Option for 33160PA factory installed only. | 90.00 |
PA-10 | 1-10W input option for 3340PA/3370PA Assembled Amplifiers, factory installed (specify input level) | 30.00 |
915LNAC | High IP3, 33cm LNA Weatherproof, <0.7dBNF, >16dBG, DC Coax, Type N | 120.00 |
915LNA | High IP3, 33cm LNA Weatherproof, <0.7dBNF, >16dBG, DC Feed-thru, Type N | 120.00 |
915LNAHC | High IP3, 33cm LNA Weatherproof, <0.7dBNF, >25dBG, DC Coax, Type N | 150.00 |
915LNAH | High IP3, 33cm LNA Weatherproof, <0.7dBNF, >25dBG, DC Feed-thru, Type N | 150.00 |
33LNAWPQ | ATV LNA, High IP3, <0.7dBNF, >13dB Gain, Coax Bias 1.0DBNF> | 120.00 |
WSSA-902 | 902MHz Synthesized Weak Signal Source assemble in enclosure, requires external 10MHz source | 170.00 |
WSSAI-902 | 902MHz Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 200.00 |
WSSA-903 | 903MHz Synthesized Weak Signal Source assemble in enclosure, requires external 10MHz source | 170.00 |
WSSAI-903 | 903MHz Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 200.00 |
WSSA-915 | 915MHz Synthesized Weak Signal Source assemble in enclosure, requires external 10MHz source | 170.00 |
WSSAI-915 | 915MHz Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 200.00 |
WSSA-M | Multiple Frequency Synthesized Weak Signal Source assem in enclosure, requires external 10MHz source | 190.00 |
WSSA-IM | Multiple Frequency Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 220.00 |
A32 | Assembled A32 synthesizer board only used for all WSSA. Requires External 10 MHz. | 139.00 |
Follow link for other related Accessories. |
23cm Products (1240 - 1300 MHz) | ||
---|---|---|
1296-144HP2 | 1296 MHz transverter assembled, 25W out, <1.5dBNF, 144MHz IF | Unavailable under Re-design |
1296-144HP5 | 1296 MHz transverter assembled, 50W out, <1.5dBNF, 144MHz IF | Unavailable under Re-design |
COMMRF-OPT | Common RF option for all HP version transverters, factory installed only. | 75.00 |
1296-144 | 1296MHz transverter, <1.5dBNF, separate 144MHz IF, with T/R switch Assembled | Unavailable under Re-design |
1296-144CK | 1296MHz transverter, <1.5dBNF, 144MHz IF, Complete kit with hardware and enclosure | Unavailable under Re-design |
1296-144K | 1296MHz transverter, <1.5dBNF, 144MHz IF PC Board kit , without hardware or enclosure | Unavailable under Re-design |
1296-144HK | Hardware kit with connectors and machined enclosure | 100.00 |
1296-144PCB | PC Board and documentation of 1296MHz transaverter with 144MHz IF | Unavailable under Re-design |
1296-28HP2 | 1296 MHz transverter assembled, 25W out, <1.5dBNF, 28MHz IF | Unavailable under Re-design |
1296-28HP5 | 1296 MHz transverter assembled, 50W out, <1.5dBNF, 28MHz IF | Unavailable under Re-design |
1296-28 | 1296 MHz transverter, High Dynamic Range, <1.5dBNF, split 28MHz IF w/ T/R Assembled | Unavailable under Re-design |
1296-28CK | 1296 MHz transverter, High Dynamic Range, <1.5dBNF, 28MHz IF Complete kit with connectors, machined enclosure | Unavailable under Re-design |
1296-28K | 1296 MHz transverter, High Dynamic Range, <1.5dBNF, 28MHz IF PCB kit w/out hardware or enclosure | Unavailable under Re-design |
1296-28HK | Hardware kit with machined enclosure | 100.00 |
1296-28PCB | PC Board and documentation of 1296MHz transaverter with 28MHz IF | Unavailable under Re-design |
X192.000 | Standard 192.000MHz crystal for 144MHz IF =1296MHz | 18.00 |
X181.143 | Standard 181.143MHz crystal for 28MHz IF = 1296MHz | 18.00 |
X187.333 | Standard 187.333MHz crystal for 144MHz IF = 1268MHz | 18.00 |
1296-HIF | 10W Common IF option for 1296-144 transverters with inter-digital filters built before May 2002 | 35.00 |
2330PA | 1270-1300MHz 30W linear amplifier, 50mW input, Assembled. NO T/R switch | 240.00 |
2330PATV | 1250-1290MHz 30W linear amplifier, 50mW input, Assembled. NO T/R switch | 240.00 |
2330PACK | 23cm 30W linear amplifier, 50mW input, Complete kit with connectors, machined enclosure and heatsink NO T/R switch | 190.00 |
2360PA | 23cm 60W linear amplifier, 150mW input, assembled only | 425.00 |
2360PAS | 23cm 60W linear amplidier, 150mW input with T/R switch, assembled only | 545.00 |
23120PA | 23cm 120W linear amplifier, assembled only | Base Price 845.00 |
TRANS-OPT | Transceiver Option for 23120PA factory installed only. | 90.00 |
PA-10 | 1-10W input option for 23cm Assembled Power Amplifiers, factory installed only ( specify input level) | 30.00 |
1296LNAC | High IP3, 23cm LNA, Weatherproof, <0.7dBNF, >16dBG, DC Coax | 120.00 |
1296LNA | High IP3, 23cm LNA, Weatherproof, <0.7dBNF, >16dBG, DC Feed-thru | 120.00 |
1296LNAHC | High IP3, 23cm LNA, Weatherproof, <0.7dBNF, >25dBG, DC Coax. Not recommended for ATV. | 150.00 |
1296LNAH | High IP3, 23cm LNA, Weatherproof, <0.7dBNF, >25dBG, DC Feed-thru. | 150.00 |
23LNAWPQ | 20dB Gain version of LNAWP preamp.
ATV version with >13dB Gain and <1.0DBNF COAX DC feed (70cm shorted input). |
120.00 |
WSS1296 | 1296.1MHz Weak signal source, Crystal based | Discontinued |
WSSA-1275 | 1275MHz Synthesized Weak Signal Source assemble in enclosure, requires external 10MHz source | 170.00 |
WSSAI-1275 | 1275MHz Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 200.00 |
WSSA-1296 | 1296MHz Synthesized Weak Signal Source assemble in enclosure, requires external 10MHz source | 170.00 |
WSSAI-1296 | 1296MHz Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 200.00 |
WSSA-M | Multiple Frequency Synthesized Weak Signal Source assem in enclosure, requires external 10MHz source | 190.00 |
WSSA-IM | Multiple Frequency Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 220.00 |
A32 | Assembled A32 synthesizer board only used for all WSSA. Requires External 10 MHz. | 139.00 |
Follow link for other related Accessories. |
Commercial and non-HAM band Products | ||
---|---|---|
1691LNAC | High IP3, 1691MHz LNA Weatherproof, <0.7dBNF, >16dBG, DC coax feed, assembled. | 120.00 |
1691LNA | High IP3, 1691MHz LNA Weatherproof, <0.7dBNF, >16dBG, type "N" connector, Feed-thru connector for DC power | 120.00 |
1691LNAHC | High IP3, 1691MHz LNA Weatherproof, <0.7dBNF, >25dBG, and DC coax feed | 150.00 |
1691LNAH | High IP3, 1691MHz LNA Weatherproof, <0.7dBNF, >25dBG, Feed-thru connector for DC power | 150.00 |
12LNA | 2.4-2.7GHz Low noise Amplifier Weatherproof, 21dB Gain, <2.0DBNF, Type "N" conn, DC on Coax> | 85.00 |
12LNAFT | 2.4-2.7GHz LNA, Weatherproof, 21dB Gain, <2.0DBNF, Type "N" conn, Feed-thru for DC Power> | 85.00 |
14LNA | 1.7-2.2GHz Low Noise Amplifier, Weatherproof, 21dB Gain, <2.0DBNF, Type "N" conn, DC on Coax> | 85.00 |
14LNAFT | 1.7-2.2GHz LNA, Weatherproof, 21dB Gain, <2.0DBNF, Type "N" conn, Feed-thru for DC Power> | 85.00 |
1420LNAC | High IP3, 1350-1500MHz LNA, <0.7dBNF, >15dBG, weatherproof, Assem only! | 120.00 |
1420LNAHC | High IP3, 1350-1500MHz LNA, <0.7dBNF, >25 dBG, weatherproof. Assembled only | 150.00 |
WSS1420 | 1420 MHz weak signal source Crystal Based | Discontinued |
WSSA-1420 | 1420MHz Synthesized Weak Signal Source assemble in enclosure, requires external 10MHz source | 170.00 |
WSSAI-1420 | 1420MHz Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 200.00 |
WSSA-M | Multiple Frequency Synthesized Weak Signal Source assem in enclosure, requires external 10MHz source | 190.00 |
WSSA-IM | Multiple Frequency Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 220.00 |
A32 | Assembled A32 synthesizer board only used for all WSSA. Requires External 10 MHz. | 139.00 |
1520LNAC | High IP3,1500-1650 MHz LNA <0.7dBNF, >15dBG, weatherproof., DC Coax | 120.00 |
1520LNAHC | High IP3,1500-1650 MHz LNA <0.7dBNF, >25dBG, weatherproof, DC Coax | 150.00 |
L137LNA | 137 MHz. GaAs pHEMT pre amp., 17dBG, <0.7dBNF, RX only! BNC connectors, assembled | 75.00 |
L137LNA-1N | 137 MHz. GaAs pHEMT pre amp., 17dBG, <0.7dBNF, RX only! type "N" conn. on Input | 75.00 |
L137LNA-2N | 137 MHz. GaAs pHEMT pre amp., 17dBG, <0.7dBNF, RX only! 2 type "N" conn. | 75.00 |
L137LNAWP | Weatherproof version of L137LNA with type "N" connectors | 100.00 |
L137LNACK | Complete Kit of GaAs pHEMT pre-amp., 17dBG, <17DBG,><0.7dBNF, RX, BNC connectors> | 45.00 |
L137LNACK-1N | Complete Kit of GaAs pHEMT pre-amp., 17dBG, <17DBG,><0.7dBNF, RX, 1 type "N" connector on Input> | 45.00 |
L137LNACK-2N | Complete Kit of GaAs pHEMT pre-amp., 17dBG, <17DBG,><0.7dBNF, RX, 2 type "N" connectors> | 45.00 |
L137LNAK | PC Board kit of L137LNA without enclosure or connectors | 25.00 |
L137LNAPCB | PC Board and documentation of 137LNA | 12.00 |
836LNAC | High IP3 800-900MHz LNA, <0.6dBNF,>16dBG,Weatherproof, DC Coax, Type "N" conn.. | 120.00 |
836LNAHC | High IP3 800-900MHz LNA, <0.6dBNF,>25dBG,Weatherproof, DC Coax, Type "N" conn.. | 150.00 |
1880LNAC | High IP3, 1750-1900MHz LNA, <0.7dBNF,>16dBG, Weatherproof, DC Coax, Type "N" conn.. | 120.00 |
1880LNAHC | High IP3, 1750-1900MHz LNA, <0.7dBNF,>25dBG, Weatherproof, DC Coax, Type "N" conn.. | 150.00 |
1960LNAC | High IP3, 1900-2100 MHz LNA,<0.7dBNF,>16dBG, Weatherproof, DC Coax, Type "N" conn.. | 120.00 |
1960LNAHC | High IP3, 1900-2100 MHz LNA, <0.7dBNF,>25dBG, Weatherproof, DC Coax, Type "N" conn.. | 150.00 |
2442LNAC | High IP3, 2100-2500 MHz LNA, <0.8dBNF,>12dBG, Weatherproof, DC Coax, Type 'N" conn. | 120.00 |
2442LNAHC | High IP3, 2100-2500 MHz LNA, <0.8dBNF,>25dBG, Weatherproof, DC Coax, Type 'N" conn. | 150.00 |
BT | Pre amp DC power inserter, >1 GHz, Type "N" (F) connectors | 40.00 |
BTM | Pre amp DC power inserter, >1 GHz, Type "N" (M) connector on input, "N" (F) on output | 45.00 |
BTL | Pre amp DC power inserter, <1 GHz> | 40.00 |
BTLM | Pre amp DC power inserter, <1 GHz, Type "N" (M) connector on input, "N" (F) on output> | 45.00 |
Follow link for other related Accessories. |
13cm Products (2000 - 2400 MHz) | ||
---|---|---|
2304-144 | 2304MHz transverter, 1W <2DBNF, Separate TX/RX ports, A32 synth LO requires external clock | 500.00 |
OPT-I | Internal 10 MHz clock option to replace external clock configuration. | 25.00 |
OPT-M | Multiple frequency option. See A32 info for available frequencies. Option is included in all kits | 20.00 |
2304-144WTR | SMA relay and relay driver installed on 2304-144 only | When Available $60.00 |
2304-144CK | 2304MHz Transverter Complete kit, 1W, <2DBNF, A32 synth LO requires external clock | 400.00 |
2304-144LP | 2304MHz xverter >20mW Output, <2DBNF, Split TX/RX , A32 synth LO requires external clock | 425.00 |
2304CK | 2304MHz xverter >20mW complete kit, machined enclosure, synthesize LO requires external clock | 350.00 |
2304K | 2304MHz transverter PC Board kit, Transverter, TC and A32 synth LO requires external clock | 275.00 |
2304BK | 2304 MHz transverter PC Board only with components (TC and A32 not included) | 100.00 |
2304HK | Hardware Kit with machine enclosure, end plates and pallet. | 100.00 |
2304PCB | 2304MHz Transverter PC Board only and documentation . | 75.00 |
2400-144RX | 2400MHz Assembled Receive Converter 144MHz IF, <1.0 dB NF, > 20dB Gain> | 225.00 |
10-4 | 10MHz Amplified and Filtered 4 Way divider Assembled in enclosure | 75.00 |
10-4CK | 10MHz Amplified and Filtered 4 Way divider complete kit with enclosure | 50.00 |
10-4K | 10MHz Amplified and Filtered 4 Way divider PC Board kit, NO enclosure | 25.00 |
10-4PCB | 10MHz Amplified and Filtered 4 Way divider PC Board only with documentation | 12.00 |
13ULNA | 2.3-2.4GHz Assembled PHEMT LNA W5LUA design, <0.7dBNF, >17dBG Type "N" conn. | 120.00 |
13ULNASMA | 2.3-2.4GHz Assembled PHEMT LNA W5LUA design, <0.7dBNF, >17dBG SMA conn. | 120.00 |
13ULNAK | 2.3-2.4GHz PHEMT LNA W5LUA design, <0.7dBNF, >17dBG PC Board Kit | 45.00 |
13ULNACK | 2.3-2.4GHz PHEMT LNA W5LUA design, <0.7dBNF, >17dBG complete kit with type "N" connectors | 85.00 |
13ULNACK-S | 2.3-2.4GHz PHEMT LNA W5LUA design, <0.7dBNF, >17dBG complete kit with SMA connectors | 85.00 |
13ULNAPCB | 2.3-2.4GHz PHEMT LNA W5LUA design, PC Board and documentation. | 20.00 |
13LNA | 2.1-2.5GHz Low Noise Amplifier, 21dB Gain, <2.0dBNF, Type "N" Conn., DC on Coax | 85.00 |
13LNAFT | 2.1-2.5GHz LNA, 21dB Gain, <2.0dBNF, Type "N" conn., DC Feed thru | 85.00 |
WSS1152 | 1152.023MHz x2 = 2304.060 Weak signal source, Crystal Based | Discontinued |
WSSA-1152 | 2304MHz Synthesized Weak Signal Source assemble in enclosure, requires external 10MHz source | 170.00 |
WSSAI-1152 | 2304MHz Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 200.00 |
WSS2401 | 2401.000 Weak signal source, Crystal based | Discontinued |
WSSA-2401 | 2401MHz Synthesized Weak Signal Source assemble in enclosure, requires external 10MHz source | 170.00 |
WSSAI-2401 | 2401MHz Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 200.00 |
WSSA-M | Multiple Frequency Synthesized Weak Signal Source assem in enclosure, requires external 10MHz source | 190.00 |
WSSA-IM | Multiple Frequency Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 220.00 |
A32 | Assembled A32 synthesizer board only used for all WSSA. Requires External 10 MHz. | 139.00 |
Follow link for other related Accessories. |
9cm Products (3300 - 3480 MHz) | ||
---|---|---|
3456-144 | 3456 MHz xverter, 1W, <2dBNF, Separate TX/RX ports, A32 synth LO requires external clock | 500.00 |
OPT-I | Internal 10 MHz clock option to replace external clock configuration. | 25.00 |
OPT-M | Multiple frequency option. See A32 info for available frequencies. Option is included in all kits | 20.00 |
3456-144WTR | SMA relay and relay driver for 3456 transverters. | When Available $60.00 |
3456-144LP | 3456MHz xverter, 20mW, <2dBNF, Separate TX/RX port, A32 synth LO requires external clock | 425.00 |
3456-144CK | 3456 MHz transverter, <2dBNF, Complete kit, 1W, A32 synth LO requires external clock | 400.00 |
3456CK | 3456 MHz transverter , <2dBNF, Complete kit, 20mW, A32 synth LO requires external clock | 350.00 |
3456K | 3456MHz xverter PC Board kit 20mW. Transverter, TC and A32 synth LO requires external clock | 275.00 |
3456BK | 3456MHz transverter PC Board only with components (TC and A32 kit not included)) | 100.00 |
3456HK | 3456MHz transverter hardware kit with machined enclosure, end plates and pallet | 100.00 |
3456PCB | 3456MHz transverter PC Board and documentation. | 75.00 |
10-4 | 10MHz Amplified and Filtered 4 Way divider Assembled in enclosure | 75.00 |
10-4CK | 10MHz Amplified and Filtered 4 Way divider complete kit with enclosure | 50.00 |
10-4K | 10MHz Amplified and Filtered 4 Way divider PC Board kit, NO enclosure | 25.00 |
10-4PCB | 10MHz Amplified and Filtered 4 Way divider PC Board only with documentation | 12.00 |
9ULNA | 3.4GHz Assembled PHEMT LNA W5LUA design, <0.8dBNF, >14dBG type "N" | 120.00 |
9ULNASMA | 3.4GHz Assembled PHEMT LNA W5LUA design, <0.8dBNF, >14dBG SMA | 120.00 |
9ULNAK | 3.4GHz PHEMT LNA W5LUA design, <0.8dBNF, >14dBG PC Board kit | 45.00 |
9ULNACK | 3.4GHz PHEMT LNA W5LUA design, <0.8dBNF, >14dBG Complete kit with type "N" connectors | 85.00 |
9ULNACK-S | 3.4GHz PHEMT LNA W5LUA design, <0.8dBNF, >14dBG Complete kit with SMA connectors | 85.00 |
9ULNAPCB | 3.4GHz PHEMT LNA W5LUA design PC Board and documentation. | 20.00 |
WSSA-1152 | 3456MHz Synthesized Weak Signal Source assemble in enclosure, requires external 10MHz source | 170.00 |
WSSAI-1152 | 3456MHz Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 200.00 |
WSSA-M | Multiple Frequency Synthesized Weak Signal Source assem in enclosure, requires external 10MHz source | 190.00 |
WSSA-IM | Multiple Frequency Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 220.00 |
A32 | Assembled A32 synthesizer board only used for all WSSA. Requires External 10 MHz. | 139.00 |
Follow link for other related Accessories. |
5cm Products (5760 MHz) | ||
---|---|---|
5760-144 | 5760 transverter, 3W, <1.3dBNF, Separate TX/RX ports, A32 synth LO requires external clock | 775.00 |
OPT-I | Internal 10 MHz clock option to replace external clock configuration. | 25.00 |
OPT-M | Multiple frequency option. See A32 info for available frequencies. Option is included in all kits | 20.00 |
5760-WTR | SMA relay and relay driver installed on 5760-144 or 5760-144LP | When Available $60.00 |
5760-144CK | 5760 transverter, 3W, <1.3dBNF, complete kit, A32 synth LO requires external clock | 625.00 |
5760-144LP | 5760 transverter, >10mW, <3.5dBNF, Separate TX/RX ports, A32 synth LO requires external clock | 500.00 |
5760CK | 5760 transverter, >10mW, <3.5dBNF, complete kit, A32 synth LO requires external clock | 400.00 |
5760K | 5760 Xverter, >10mW, <3.5dBNF, PCB kit with pallet w/ TC and A32 synth requires external clock | 350.00 |
5760BK | 5760 Xverter, >10mW, <3.5dBNF, xverter PC Board only kit with pallet (TC and A32 not included). | 195.00 |
5760PCB | 5760MHz transverter Teflon PC Board and documentation LP version only (10mW)!! | 75.00 |
5760HK | Hardware kit with machined enclosure, end plates and connectors for LP version only | 60.00 |
10-4 | 10MHz Amplified and Filtered 4 Way divider Assembled in enclosure | 75.00 |
10-4CK | 10MHz Amplified and Filtered 4 Way divider complete kit with enclosure | 50.00 |
10-4K | 10MHz Amplified and Filtered 4 Way divider PC Board kit, NO enclosure | 25.00 |
10-4PCB | 10MHz Amplified and Filtered 4 Way divider PC Board only with documentation | 12.00 |
5ULNA | 5.7GHz Assembled PHEMT LNA W5LUA design <0.9dBNF, 13dBG, SMA conn. only | 120.00 |
5ULNACK | 5.7GHz PHEMT LNA W5LUA design < 0.9dBNF, 13dBG, Complete kit, SMA conn. only | 85.00 |
5ULNAK | 5.7GHz PHEMT LNA W5LUA design < 0.9dBNF, 13dBG PC Board kit. | 45.00 |
5ULNAPCB | 5.7GHz PHEMT LNA W5LUA design PC Board and documentation. | 20.00 |
WSSA-1152 | 5.7GHz Synthesized Weak Signal Source assemble in enclosure, requires external 10MHz source | 170.00 |
WSSAI-1152 | 5.7GHz Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 200.00 |
WSSA-M | Multiple Frequency Synthesized Weak Signal Source assem in enclosure, requires external 10MHz source | 190.00 |
WSSA-IM | Multiple Frequency Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 220.00 |
A32 | Assembled A32 synthesizer board only used for all WSSA. Requires External 10 MHz. | 139.00 |
Follow link for other related Accessories. |
3cm Products (10.4 GHz) | ||
---|---|---|
10368-144 | 10368MHz Xverter, >3W, <1.5dBNF, Split TX/RX , assembled, A32 synth LO requires external clock | 775.00 |
10368-144LP | 10368MHz transverter, >10mW, <3.5dBNF, Split TX/RX assembled, A32 synth LO requires external clock | 500.00 |
OPT-I | Internal 10 MHz clock option to replace external clock configuration. | 25.00 |
OPT-M | Multiple frequency option. See A32 info for available frequencies. Option is included in all kits | 20.00 |
10368-WTR | SMA relay and relay driver for 10368-144 or 10368-144LP transverters. | When Available $60.00 |
10368-144CK | 10GHz transverter, 3W, <1.5dBNF, Complete Kit, A32 synth LO requires external clock | 625.00 |
10368CK | 10GHz transverter, >10mW, <3.5dBNF, Complete Kit, synthesize LO requires external clock | 400.00 |
10368K | 10GHz xverter PC Board Kit, >10mW, <3.5dBNF, w/ TC and A32 synth LO requires external clock | 350.00 |
10368BK | 10GHz xverter PC Board only with components and pallet, >10mW, <3.5dBNF, TC and A32 kit not included | 195.00 |
10368HK | Hardware kit with machined enclosure, end plates and connectors forLP Version (10mW) | 60.00 |
10368PCB | 10368MHz transverter Teflon PC Board and documentation only LP Version. (10mW) | 75.00 |
10-4 | 10MHz Amplified and Filtered 4 Way divider Assembled in enclosure | 75.00 |
10-4CK | 10MHz Amplified and Filtered 4 Way divider complete kit with enclosure | 50.00 |
10-4K | 10MHz Amplified and Filtered 4 Way divider PC Board kit, NO enclosure | 25.00 |
10-4PCB | 10MHz Amplified and Filtered 4 Way divider PC Board only with documentation | 12.00 |
3-3PAP | 10368MHz Power Amplifier, 3W output, 23dBG SMA, Assembled on Pallet. | 325.00 |
3-3PACK | 10368MHz Power Amplifier, 3W output, 23dBG SMA, Complete kit wit pallet. | 225.00 |
3-3PAK | 10368MHz Power Amplifier, 3W output, 23dBG SMA, PC Board kit. | 165.00 |
3-3PAPCB | 10368MHz Power Amplifier, 3W output, PC Board and documentation only. | 40.00 |
3-8PAPK | 10368MHz Power Amplifier, 8W output, PC Board kit (no PWR FET). | 60.00 |
3-2ULNA | W5LUA PHEMT design preamp. 2 stage 22dBG, <1.10DBNF | 140.00 |
3-2ULNACK | W5LUA PHEMT design preamp. 2 stage 22dBG, <1.10DBNF complete kit, SMA conn. only | 105.00 |
3-2ULNAK | W5LUA PHEMT design preamp. 2 stage 22dBG, <1.10DBNF PCB kit | 65.00 |
3-2ULNAPCB | PC Board and documentation of 3-2ULNA | 20.00 |
WSSA-1152 | 10GHz Synthesized Weak Signal Source assemble in enclosure, requires external 10MHz source | 170.00 |
WSSAI-1152 | 10GHz Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 200.00 |
WSSA-M | Multiple Frequency Synthesized Weak Signal Source assem in enclosure, requires external 10MHz source | 190.00 |
WSSA-IM | Multiple Frequency Synthesized Weak Signal Source assemble in enclosure, with internal 10MHz source | 220.00 |
A32 | Assembled A32 synthesizer board only used for all WSSA. Requires External 10 MHz. | 139.00 |
Follow link for other related Accessories. |
Accessories for all DEM products | ||
---|---|---|
VHFAPOLLO | Assembled VHF synthesizer PC board only for VHF/UHF DEMI transverters. Requires 10MHz source. Frequency selection chart. | 129.00 |
VHFAPOLLOK | Assembled VHF synthesizer board for VHF/UHF DEMI transverters w/ hardware. Specify which transverter. Requires 10MHz source. | 144.00 |
VHFAPOLUPG | Installation of VHF synthesizer in pre-assembled DEMI transverter. Requires 10MHz source. | 170.00 |
A32RFK | Assembled A32 synthesizer board for 2.3-10GHz DEMI transverters with hardware. Requires 10MHz source. Frequency selection chart. | 144.00 |
A32RFKX4 | Set of 4 A32RFK Assembled synthesizer with hardware. Requires 10MHz source. | 548.00 |
A32 | Assembled A32 synthesizer PC board only for 2.3-10GHz DEMI transverters Requires 10MHz source. Frequency selection chart. | 139.00 |
A32X4 | Set of 4 A32 Assembled synthesizer PC Boards only. Requires 10MHz source. | 548.00 |
10-4 | 10MHz Amplified and Filtered 4 Way divider Assembled in enclosure. | 75.00 |
10-4CK | 10MHz Amplified and Filtered 4 Way divider complete kit with enclosure. | 50.00 |
10-4K | 10MHz Amplified and Filtered 4 Way divider PC Board kit, NO enclosure. | 25.00 |
10-4PCB | 10MHz Amplified and Filtered 4 Way divider PC Board only with documentation. | 12.00 |
TC | Transverter control IF switch. 10W input max. w/ adjustable attenuator, 9V regulated supply, w/24V relay driver. Used in all microwave transverters. Replaces PIN & PINK. Assembled PC Board. | 45.00 |
TCK | Xverter control IF switch. 10W input max. w/ adjustable atten., 9V regulated supply, w/24V relay driver. PC board kit | 35.00 |
TCPCB | Transverter Control IF switch PC Board and documentation | 12.00 |
TRS | 4 Step, 8 I/O, TR sequencer, assembled in an enclosure | 120.00 |
TRSB | 4 Step, 8 I/O, TR sequencer Assembled PC Board. | 60.00 |
TRSK | 4 Step, 8 I/O, TR sequencer PC Board kit. | 35.00 |
TRSCK | 4 Step, 8 I/O, TR sequencer Complete kit (includes hardware and enclosure). | 85.00 |
TRSPCB | TR Sequencer PC Board and documentation. | 15.00 |
PTT-X5K | 5 Circuit "Push to Talk" buffer. PC Board kit. | 30.00 |
PTT-X5PCB | 5 Circuit "Push to Talk" buffer. PC Board only. | 12.00 |
TIK2 | Universal Transverter Interface for Elecraft K2 transceiver, kit only. | 30.00 |
RFPMK | LED Power Meter PC Board kit | 20.00 |
ABPM | W1GHz All Band Power Meter Complete Kit | 75.00 |
RVD-1 | 28V relay driver, requires 12V, PC Board kit Only! | 10.00 |
UTR-12N | 12V PC Board mount RF relay, with 1 type "N" (F) conn., 5 watts@1.3 GHz max., Kit Only! | 20.00 |
UTR-12 | PC Board mount RF relay, 5 watts@1.3 GHz max. without connector. Kit Only! | 10.00 |
MICROLO | Microwave Transverter LO, 1070-1140MHz, Xtal freq., dependent, substitute with A32 | Discontinued |
AOS-28 | RF sensed solid state T/R switch with built in 25W attenuator , 28MHz | 70.00 |
AOS-144 | RF sensed solid state T/R switch with built in 25W attenuator, 144MHz | 80.00 |
GHZMIN-144 | 144MHz W1GHZ Mini Transverter for flex-1500 (No Oscillator), PC Board kit | 65.00 |
GHZMIN-222 | 222MHz W1GHZ Mini Transverter for flex-1500 (No Oscillator), PC Board kit | 65.00 |
GHZMIN-432 | 432MHz W1GHZ Mini Transverter for flex-1500 (No Oscillator), PC Board kit | 65.00 |
GHZMIN-PCB | W1GHZ Mini Transverter for flex-1500 PC Board only | 6.00 |
CLK-125SMD | 125 MHz SMD Oscillator for W1GHZ Mini Transverter (when available). | 5.00 |
PPS-1 | Single stage bias power supply for GaAs-FET preamplifiers | 12.00 |
PPS-2 | Two stage dual bias power supply for GaAs-FET preamplifiers | 15.00 |
MMICK | MMIC amp. PC Board kit. Specify Type (MAR series only, Specify 1,2,3,4,6 and MAV11) | 10.00 |
MMICPCB | Universal wide band amplifier PC Board used with MAR series only | 5.00 |
MMICKE1 | 2 stage MMIC Teflon PC Board Kit with two ERA-1 | 14.00 |
MMICKE2 | 2 stage MMIC Teflon PC Board Kit with two ERA-2 | 14.00 |
MMICKGALI | 2 stage MMIC Teflon PC Board kit with one GALI-74 | 14.00 |
MMICKE5 | 2 stage MMIC Teflon PC Board Kit with one ERA-5 | 14.00 |
MMICKE6 | 2 stage MMIC Teflon PC Board Kit with one SGA-6286 | 14.00 |
MMICKMGA | 2 stage MMIC Teflon PC Board Kit with one MGA86576 | 18.00 |
MMICTEF | 2-stage, Teflon PC Board used with ERA series and MGA86576 MMIC"s | 8.50 |
BT | Pre amp DC power inserter, >1GHz Type "N" (F) conn | 40.00 |
BTM | Pre amp DC power inserter, >1GHz Type "N" conn (M) on Input, (F) on Output | 45.00 |
BTL | Pre amp DC power inserter, < 1GHz. Type "N" (F) conn | 40.00 |
BTLM | Pre amp DC power inserter, < 1GHz. Type "N" conn (M) on Input, (F) on Output | 45.00 |
SSBT | Safety Switch Bias Tee, Type N (M) on Input and Type N (F) on output; 50 Watts | 65.00 |
DN001K | Higher Receive IP3 MOD 6M-70CM Transverter | 10.00 |
DN002HK | Higher Receive IP3 MOD 33CM and above Preamplifier | 10.00 |
DN002LK | Higher Receive IP3 MOD 6M-70CM Preamplifier | 10.00 |
DN005K | Higher Receive IP3 MOD 903-144 & 1296-144 Xverter | 10.00 |
HARDWARE AND COMPONENTS | ||
---|---|---|
Connectors | ||
N3/4-F | Type "N", female, 4 hole, 3/4" flange mount | 7.00 |
NPANEL-F | Type "N", female, 4 hole, large | 2.50 |
BNCPANEL | BNC, female, 1 hole mount, 3/8" dia. | 2.00 |
SMAPLAT-F | SMA, female, 4 hole plated brass, solderable, 9/16" long teflon, 0.050" dia. gold pin | 3.00 |
SMA3/4-F | SMA, female, 4 hole, 3/4" Flange, solderable, 0.050" dia. gold pin; Pictures: Side, Front | 4.50 |
SMAPANEL | SMA, female, 1 hole mount | 2.50 |
SMAPCB | SMA, female, 0.062" PC board mount connector | 5.00 |
RCA-J | RCA Jack with ground lug, 1/4" panel | 1.50 |
RCA-P | RCA Plug with metal shield | 1.50 |
Relays and coaxial products | ||
CX140S | Tohtsu CX140S, 250W at 1 GHz, 40dB isolation, One type "N" Connector, 12V | 70.00 |
SMARLY | SMA relays used, Transco or equiv., tested @ 10GHZ, 24volts | When Available $45.00 |
RVD-1 | 28V relay driver kit, requires 12V and PTT ground to energize | 10.00 |
G5V-12 | 12V DC relay, PC Board mount, DPDT, OMRON or equivalent | 3.00 |
G5V-5 | 5V DC relay, PC Board mount, DPDT, OMRON or equivalent | 3.00 |
G6Y-12 | 12V RF relay, PC Board mount, SPDT, >60dB isolation @ 1.5GHz, OMRON or equivalent | 6.00 |
Components | ||
---|---|---|
Capacitors | ||
ATC1-XXX | B case, 110mil porcelain chips. Values available: 1.6, 6.8, 12, 15, 18, 27, 39, 1000. Correct Orientation, Soldering | 10/15.00 or 1/2.00 |
ATC50-XXX | A case, 55mil porcelain chips. Values available: 1.2, 8.2, 47. Correct Orientation, Soldering | 10/9.00 or 1/1.25 |
ATC50-100 | A case, 55mil porcelain chips. 100pF. Correct Orientation, Soldering | 10/6.00 or 1/1.00 |
FEED 4-40 | DC Power Line Filter, #4-40 threads | 2.50 |
FEED 8-32 | DC Power Line Filter, #8-32 threads | 3.00 |
TRIM1-6 | Rotary ceramic trim cap, 1.8-6pF Red Horizontal Mount | 1.00 |
TRIM2-12 | Rotary ceramic trim cap, 2.8-12.5 None, Horizontal Mount | 1.00 |
TRIM0.3-3 | Rotary surface mount trim cap, 0.3-3 pF | 2.00 |
CCB-XXX | Chip capacitors in bag (25 same value chips/bag), most values avail. (1.5pF - 1.0uF), specify val. | 2.00 |
CCB-TANT | Chip capacitor 10 pieces per bag 1.0 uF tantalum | 2.50 |
CCB-TANT10 | Chip capacitor 10 pieces per bag 10.0 uF tantalum | 2.50 |
ELEC-100 | 100 uF, 25 VDC electrolytic Cap, axial | 0.50 |
ELEC-2.2 | 2.2 uF, 16 VDC electrolytic Cap, axial | 0.25 |
DISC-XXX | Axial disc ceramic caps, 10(010) - 0.1uF(104), specify values | 0.25 |
Resistors | ||
1K POTSMD | 1000 ohm Surface Mount Potentiometer | 0.50 |
1KPOT | 1000 ohm PC-mount potentiometer | 1.00 |
50OHMTERM | 10W, strip-line flange mount, 50ohm load #4 mounting hole, PPT 300-10-3 | 14.00 |
3OHMPWRRES | 10W power resistor, 3.0 Ohm | 4.00 |
RCB-XXX | Chip resistors in bag (25 same value chips/bag), most values avail. (10ohm - 10Mohm), specify value | 2.00 |
CAR-XXX | Carbon composition resistors, 1/4 W, 22 - 680 and 1.5K, specify value | 0.25 |
NTC-10K | 10K Ohm NTC Thermistor leaded | 1.00 |
PTC-60 | 60 deg. Thermistor, RL 3006-50-60-25-PTC | 2.00 |
PTCSK | Thermistor clamp assembly kit. | 4.00 |
TCHLOAD | 50OHM Load TO-220 Package, 35W @ 25°C | 5.00 |
Inductors | ||
0.10CHOKE | 0.10 uH molded choke | 0.75 |
0.22CHOKE | 0.22 uH molded choke | 0.75 |
0.33CHOKE-H | 0.33 uH molded VHF choke, 79FR33M | 1.25 |
MMICs | ||
FMM5061VF | 9.5-13.3GHz Power Amplifier MMIC, 27dBG, Pout +33dBm | 115.00 |
FMM5056VF | 5.8-7.2GHz Power Amplifier MMIC, 28dBG, Pout +34dBm | 100.00 |
MAR1 (0185) | 1GHz, 16dB Gain, 5.8dB Noise Figure, +2dBm at 1dB Gain compression | 2.00 |
MAR2 (0285) | 1GHz, 12dB Gain, 6.5dB Noise Figure, +6dBm at 1dB Gain compression | 2.25 |
MAR3 (0385) | 1GHz, 12dB Gain, 6.0dB Noise Figure, +10dBm at 1dB Gain compression | 2.30 |
MAR6 (0685) | 1GHz, 17dB Gain, 3.2dB Noise Figure, +10dBm at 1dB Gain compression | 2.20 |
MAV11 (1104) | 1GHz, 11dB Gain, 4.0dB Noise Figure, +18dBm at 1dB Gain compression | 3.00 |
ERA-1 | DC-8GHz, 10dB Gain @ 6GHz, 4dB Noise Figure, +14dBm @ 1dB Gain compression | 2.50 |
ERA-2 | DC-8GHz, 12dB Gain @ 4GHz, 4dB Noise Figure, +16dBm @ 1dB Gain compression | 2.50 |
ERA-3 | DC-8GHz, 14dB Gain @ 6GHz, 3.5dB Noise Figure, +13dBm @ 1dB Gain compression | 2.50 |
ERA-4 | DC-4GHz., 11.8dB Gain @ 4Ghz., 4.0dBNF, +18dBm @ 1 dB gain comp | 6.00 |
ERA-5 | DC-4GHz., 16dB Gain @ 4Ghz., 4.0dBNF, +19dBm @ 1 dB gain comp | 6.00 |
ERA-50 | DC-2GHz., 19.4dB Gain @ 1Ghz., 3.3dBNF, +17.2dBm @ 1 dB gain comp | 5.00 |
ERA-6 | DC-4GHz., 11dB Gain @ 4Ghz., 4.0dBNF, +19dBm @ 1 dB gain comp | 6.00 |
N6(NLB310) | DC-10GHz, 10dB Gain @ 6GHz, 5dB Noise Figure, +14dBm @ 1dB Gain compression | 3.25 |
GALI-74 | DC-1GHz, 21dB Gain @ 1 GHz, 2.7dBNF, +18dBm @ 1 dB Gain comp. SOT-89 Package | 5.00 |
Teflon PC Board available for all MMIC | ||
INA10386 | DC-2GHz, 24dBG, 3.5dB NF +14dbm 1dB Gain compression | No longer avail. |
MGA86576 | 1.5-8GHz, 23dB Gain, @ 2Ghz.<2DB Noise Figure, +6dBm at 1dB Gain compression> | 10.00 |
PHA-1 | 50- 6GHz., 13.5dB Gain @ 2GHz 2.2dBNF +22 P1DB, SOT89 Package +42dBM IP3 | 5.00 |
AH-215 | 700-2400 Mhz, 13 dB gain @1.3 Ghz, +30dBm, SO8 IC package | 25.00 |
Low Noise and Power GaAs FETs | ||
FLL177ME | L-Band Power GaAs FET, +32.5dBm @ 1dB Gain Compresion | 60.00 |
NE32584 | PHEMT, 10GHz, 0.6dB Noise Figure, 12dB Gain | 8.00 |
NE3210S01 | Super Low Noise HJ FET, 0.35dBNF @ 12GHz, 13.5dBG | 2.00 |
ATF10136 | 05-12GHz GaAs FET, 0.4dB NF @ 4GHz, 13dBG | 8.00 |
ATF10736 | Substitute with ATF10136 | No longer avail. |
ATF21186 | Substitute with ATF10136 | No longer avail. |
ATF36077 | pHEMT, 10GHz, 0.6dB Noise Figure, 12dB Gain | 8.00 |
FPD750S8 | pHEMT, 0.62dB NF @ 2GHz, 18dBG, +25P1dB, +39dBMIP3, SOT89 Package | 7.50 |
RF Transistors | ||
MPS5179 | VHF Oscillator Transistor, plastic, RSK-1 replacement | 0.50 |
2N5179 | VHF Oscillator transistor, Metal | 1.50 |
MRF559 | 1GHz, 1/2W Motorola | 2.00 |
PN2222 | NPN switching transistor, plastic 2N2222, 150 mA | 0.50 |
MPS51W | PNP switching transistor, 1 amp | 0.50 |
TIP32A | PNP switching transistor, 3 amps. | 1.50 |
TIP31A | NPN switching transistor, 3 amps. | 1.50 |
Voltage Regulators | ||
78L05 | 5V, 100mA | 0.75 |
78L08 | 8V, 100mA | 0.75 |
78L09 | 9V, 100mA | 0.75 |
7805 | 5V, 1A | 1.00 |
78M05 | 5V, 0.5A, SMD, DPAK Package | 1.00 |
78S09 | 9V, 2A, TO-220 | 2.00 |
ICL7660 | Voltage inverter, 15VDC max., 8 pin dip | 2.50 |
7660SMD | Voltage inverter, 15VDC max., SOIC-8 | 2.50 |
Diodes and Mixers | ||
MPN3404 | VHF PIN diode, low power (replaces 1SS103) | 0.25 |
MA4E2054B | Surface mount mixer diode pair, No longer available substitute with HSMS-2822 | No longer avail. |
HSMS-2822 | Surface mount mixer diode pair, | 1.00 |
HSMS2800 | Surface Mount RF Schotky Barrier diode, single (5082-2835 equivalent) | 0.50 |
HP 2800 | 5082-2800 Schotky Barrier diode, Substitute with 1N5711 | No longer avail. |
1N5711 | Schotky Barrier diode | 0.25 |
HP 3824 | surface mount dual pin diode | 1.00 |
SYM-18H | 5-100MHz mixer, +17dBm LO, Surface Mount | 14.00 |
TUF-1H | 500MHz, 17dBm LO mixer, small package | 18.00 |
ADE-3G | Surface mount mixer, 2.3-2.7GHz, +7dBM LO | 10.00 |
1N914 | Switching diode, or equivalent 1N4148 | 0.25 |
1N4001 | 100, 1 amp rectifier diode | 0.25 |
LED | Red LED, 1/8" dia. 30 mA | 0.50 |
LED-B | Blue LED, 1/8" dia. | 0.75 |
Enclosures | ||
ROSE-L | Weatherproof, cast aluminum, 3.75" x 2.5" x 1.375" (inside view) | 20.00 |
ROSE-S | Weatherproof, cast aluminum, 2.5" x 2.25" x 1.375" (inside view) | 12.00 |
CTPE113 | Weatherproof, cast aluminum, 4.53" x 3.54" x 2.17" (inside view) | 15.00 |
DEM-M | Extruded aluminum box with end plates, 4.125" x 1.875" x 7.75" (inside view) | 30.00 |
DEM-L | Extruded aluminum box with end plates, 4.125" x 1.875" x 9.75" (inside view) | 35.00 |
DEM-LNA | Die-cast aluminum, 3.54" x 1.42" x 1.18" | 8.00 |
1590B | Hammond die-cast aluminum, 4.4" x 2.4" x 1.1" | 9.50 |
Heatsink material available for all Hammond and Eagle enclosures. Call for pricing. | ||
Miscellaneous | ||
5880-15 | 5880 Duroid equivalent, 0.015" thick | 0.60/sq.in |
5880-30 | 5880 Duroid equivalent, 0.031" thick | 1.00/sq.in |
BRASS8-32 | 8-32 x 5/8" brass screw | 0.25 |
BRASS4-40 | 4-40 x 3/8" brass screw | 0.25 |
ENAMELXX | Enamel coated wire #28, #24 and #18 | 0.50/ft |
BUSS18 | Buss wire, tin plated #18 | 0.50/ft |
1/2PIPE | 1/2" pipe caps and hardware for 10 GHz filter | 1.50 |
3/4PIPE | 3/4" pipe caps and hardware for 5.7 Ghz filter | 2.00 |
SPDT | Toggle switch, SPDT, 1/4" panel mount | 2.50 |
SPDT-RT | PCB Mount Toggle switch SPDT, 1/4" hole | 2.50 |
STDF-25 | 4-40 x 1/4" aluminum stand-off for mounting PC Boards | 0.40 |
STDF-50 | 4-40 x 1/2" aluminum stand-off for mounting PC Boards | 0.40 |
SPACER-25 | #4 x 1/4" Spacer, Aluminum | 0.25 |
Our business hours
are from Monday to Thursday, 10:00AM to 7:00PM EST
(closed during lunch 12:00pm-1:00pm) |
Tel 386-364-5529